Outdoor lighting is an important part of one’s home, not only for aesthetic reasons but also for safety and security. Unfortunately, outdoor lights do not last forever, and eventually you will need to replace them.
The process of replacing outdoor lights can vary depending on the type of outdoor lights you have.
Replacing Outdoor Wall Lights
If you have wall-mounted outdoor lights, you will need to first turn off the power to the area where the light is located. You should then unscrew the existing light fixture from the wall using a screwdriver or wrench.
Once it has been removed from the wall, remove any wiring connected to it. After that, attach the new light fixture in its place and connect any wiring that was previously attached to it. Finally, turn on the power and test out your new light fixture.
Replacing Outdoor Hanging Lights
If you have hanging outdoor lights, such as those that hang from a porch or gazebo roof, you will need to start by turning off power to the area. Then use a ladder or other similar item to reach up and unscrew the existing light fixture from its mount.
Once it has been removed, disconnect any wiring connected to it and replace it with your new light fixture. Reconnect any wiring necessary for operation before turning back on power to test out your new light.
Replacing Outdoor String Lights
String lights are particularly easy to replace since they typically don’t require any wiring or mounting hardware. To replace string lights simply unplug them from their power source and remove them from where they are hung up. Then take your new set of string lights and plug them into a power source before hanging them up in their place.
Conclusion:
Replacing outdoor lights can be relatively straightforward if you know what type of lighting setup you have in place already. For wall-mounted outdoor lights, you will need to unscrew them from their mount before attaching a new one in its place while reconnecting any wiring necessary for operation afterwards.
For hanging outdoor lights, such as those that hang from a roof or gazebo roof, you will need to first use a ladder or other similar item to reach up and unscrew the existing light fixture before connecting any wiring necessary for operation afterwards. Finally for string lights simply unplug them from their power source before plugging in a new set before hanging them up again.
Conclusion: How Do You Replace Outdoor Lights?
The process of replacing outdoor lights depends on what type of lighting setup is already in place; however, with some basic knowledge and preparation it can be relatively straightforward process overall.
